Hello Guest it is December 08, 2019, 06:36:06 AM

Author Topic: never wrote a brain but would like to try, auto shutdown timer  (Read 2657 times)

0 Members and 1 Guest are viewing this topic.

Offline zarzul

*
  •  317 317
  • Wyoming, USA
    • View Profile
I haven't done any brains yet but would like to try to do one. 
I need to do an estop or reset based on a timer.
If I haven't hit the cycle start in 5 minutes I would like to shutdown the machine using the estop or reset button.

Can anyone give me a little help?
I don't know where to start?
Thanks
Arnie

Offline poppabear

*
  • *
  •  2,233 2,233
  • Briceville, TN, USA
    • View Profile
    • S S Systems, LLC
Re: never wrote a brain but would like to try, auto shutdown timer
« Reply #1 on: August 03, 2009, 05:20:42 PM »
Hey Arnie,

    Here is a Brian for you that does what you want.  Note: you have to have "Enable1" (enabled in your ports/pins cfg). The logic is based on that one.

The screen shot, and Brian is attached.

scott
Commercial Mach3 & Mach 4, Design/Build/Retrofit CNC and Industrial machines.
http://www.ss-systems-llc.com/

Offline zarzul

*
  •  317 317
  • Wyoming, USA
    • View Profile
Re: never wrote a brain but would like to try, auto shutdown timer
« Reply #2 on: August 04, 2009, 08:54:11 AM »
Scott,

Thanks for doing all the work!!   I will try it out.

Arnie