Hello Guest it is June 01, 2023, 05:27:23 AM

Author Topic: Mach4 +SheetCam post processor file  (Read 12903 times)

0 Members and 1 Guest are viewing this topic.

Mach4 +SheetCam post processor file
« on: April 16, 2016, 04:58:31 AM »
Hi all,

Need some support over here. I´m new on this and any help is appreciated.

Building from scratch a plasma CNC using the Hicon 7766 and mach4 SW.

Installed SheetCAM and was asked for the post processor file. I´ve searched without success. Does this file exist? if so can you help me?

Thx, Joao
Re: Mach4 +SheetCam post processor file
« Reply #1 on: April 18, 2016, 11:43:46 AM »
Received this info from the SheetCAM  Team. Thx.

The 'Mach3' post should work. If you are plasma cutting use the 'Mach3 plasma' post