Hello Guest it is March 28, 2024, 12:56:44 PM

Author Topic: Missing some features: File>Import & Multipass tool group  (Read 6239 times)

0 Members and 1 Guest are viewing this topic.

Missing some features: File>Import & Multipass tool group
« on: July 16, 2009, 11:14:07 AM »
Hello Mach3 Users:

I've been working my way through the Mach3 Software a step at a time. Several of the features discussed in the documentation are missing from my Mach3Mill lock down version 3.042.020. I have copied the license key file to the Mach3 folder to unlock the full program.

The first "feature" that appears to be missing is from the menu options. I click on "File" and have no option listed for importing DXF, JPEG, HPGL, or anything else. The only File menu options showing are "Load G-Code", "LazyCam...", "Entib", "Close File(s)" and "Exit".

Also missing from the screen is the window for the Automatic Z control family or the "MultiPass" options box on the "Run Program" window.

If anyone has any insight how I might access these "features" I sure would appreciate it!

Thanks,

Don

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Missing some features: File>Import & Multipass tool group
« Reply #1 on: July 16, 2009, 11:30:44 AM »
The old importers have been replaced by LazyCAM.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Missing some features: File>Import & Multipass tool group
« Reply #2 on: July 16, 2009, 11:45:17 AM »
Is there an updated PDF that accurately describes the Mach3 software & functions and features of LazyCam Pro?

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Missing some features: File>Import & Multipass tool group
« Reply #3 on: July 16, 2009, 04:15:27 PM »
I don't think so, but there are some lazyCAM tutorial videos. http://www.machsupport.com/videos/
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Missing some features: File>Import & Multipass tool group
« Reply #4 on: July 16, 2009, 05:27:36 PM »

Also missing from the screen is the window for the Automatic Z control family or the "MultiPass" options box on the "Run Program" window.

I think the multipass wizard took over from that.
Hood

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Missing some features: File>Import & Multipass tool group
« Reply #5 on: July 16, 2009, 10:46:07 PM »
Not entirely. But this should give you an idea of what you can do. If i get some time tomorrow i will add
dilling holes, contouring and few other things, but, in the mean time this LazyCam Manual  may just strike your fancy.
It's not no work of art,   ;)  ( no pun intended ART  ;D ) but rough and dirty, for now.

RICH
Re: Missing some features: File>Import & Multipass tool group
« Reply #6 on: July 17, 2009, 08:29:02 PM »
Thanks guys!!! very helpful.

Don