Hello Guest it is January 27, 2022, 05:38:16 AM

Author Topic: Step/Direction Pulse Width Default  (Read 2466 times)

0 Members and 1 Guest are viewing this topic.

Step/Direction Pulse Width Default
« on: May 24, 2009, 01:25:54 PM »
In the motor tuning screen, what is the actual pulse width of the step and direction signals if you leave this screen with 0 in these two fields. I am running a SmoothStepper and a CNC4PC C23 BOB. I can spin the stepper motors, so I know the pulse witdh is not truly zero.

Offline Hood

  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Step/Direction Pulse Width Default
« Reply #1 on: May 24, 2009, 01:34:27 PM »
If using the SS then the pulse width in motor tuning has no effect as it is set by the SS itself.