Hello Guest it is March 28, 2024, 12:37:13 PM

Author Topic: Probing with Ver. 2.00.046 Plugin Issues  (Read 2670 times)

0 Members and 1 Guest are viewing this topic.

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Probing with Ver. 2.00.046 Plugin Issues
« on: May 14, 2009, 05:22:43 PM »
Hi, All

Just fired up my Probe for a little testing.

With Mach3 ver .027 get this error Pic 1

With Mach3 ver .043 get this error Pic 2, It try's to run but fail's to complete the probing without a fight, It generates code, But it appears to not complete the final Z up and return to start point.

Any Idea's, I've tried it on 2 computers hear.

Thanks, Chip
« Last Edit: May 14, 2009, 06:47:46 PM by Chip »

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Probing with Ver. 2.00.046 Plugin Issues
« Reply #1 on: May 14, 2009, 08:05:38 PM »
Hi, All

In the Pic below, Mach3 ver .043 the probing looks like this, .5 by .5 by .250 spacing.

Chip
« Last Edit: May 14, 2009, 08:10:50 PM by Chip »