Hello Guest it is March 28, 2024, 07:01:34 AM

Author Topic: New to Lathe  (Read 6632 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: New to Lathe
« Reply #10 on: May 04, 2009, 03:43:28 PM »
It was one of your countrymen that made that screen ;D
Maybe makes sense to people who use  industrial controls, I dont know, but sure didnt make sense to me, then again I am just a Fisherman :)
Hood
Re: New to Lathe
« Reply #11 on: May 04, 2009, 04:03:33 PM »
I tried the Blue one, it's given me a headache  ;D

I have no experience of industrial controls but that's what Mach is

I guess i will have to go on another learning curve.

Phil
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: New to Lathe
« Reply #12 on: May 04, 2009, 04:07:00 PM »
Or open a mill screen of your choice with screen4 and remove all the Y axis stuff and stuff that relates top Mill only, then save as a .lset ;)
Hood
Re: New to Lathe
« Reply #13 on: May 04, 2009, 04:11:35 PM »
I did have that very idea, but i want to use the thing.

Not spend all my time on designing a screen set which is another learning curve.

Then there is the brains learning curve.

Phil
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: New to Lathe
« Reply #14 on: May 04, 2009, 04:15:06 PM »
No learning curve there, as long as you can left click and press the delete key, then once done choose File, Save As and then make sure your extension is .lset   ;)

Brains are fairly straightforward as well, you will soon get the hang of them, doing modbus stuff in it may be a bit more tricky, never tried that.
Hood