Hello Guest it is March 28, 2024, 07:00:12 AM

Author Topic: Quick Step Pulse Motor Tuning Questions Help.  (Read 7333 times)

0 Members and 1 Guest are viewing this topic.

Re: Quick Step Pulse Motor Tuning Questions Help.
« Reply #10 on: April 19, 2009, 06:29:22 PM »
It's a Bridgeport Clone with Ballscrews. 3x 1200 oz/in. Keling Steppers, 8078 Keling Drives, 72VDC 20A Keling PS.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Quick Step Pulse Motor Tuning Questions Help.
« Reply #11 on: April 19, 2009, 06:31:43 PM »
Keling drives really need 2 or 3 on the pulse width anyway, or at least the ones I have on the coill winder do, they are not actually keling named  but exactly the same.
Hood
Re: Quick Step Pulse Motor Tuning Questions Help.
« Reply #12 on: April 19, 2009, 06:55:47 PM »
I use the same exact components on my CNC router, I use quick disconnet plugs to save money as I never run both machines at once. I'll look into that, but I've never had a problem on the router, but then again I'm not sure I'd know what to look for. Thanks for the help.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Quick Step Pulse Motor Tuning Questions Help.
« Reply #13 on: April 19, 2009, 06:59:42 PM »
Motors just sounded sweeter with mine set to 2 or 3 on the coilwinder.

Hood