Hello Guest it is April 19, 2024, 02:54:13 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Rectangular Shape  (Read 3167 times)

0 Members and 1 Guest are viewing this topic.

Offline Willy

*
  • 7 7
    • View Profile
Rectangular Shape
« on: April 04, 2009, 01:28:28 PM »
I have a very large machine that I am setting up and fine tuning and I do rectangular with 4 square corners test file run. On the Mach screen and the machine run with 3 round corners as you can see from the screenshot.

Can you please tell me what cause that?

Thanks

Willy
Logged

Offline ger21

*
  • *
  • 6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Rectangular Shape
« Reply #1 on: April 04, 2009, 05:06:08 PM »
Probably CV mode.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline derekbpcnc

*
  • 195 195
    • View Profile
Re: Rectangular Shape
« Reply #2 on: April 05, 2009, 02:14:55 PM »
Hi,

For external corners, I always prog to roll the cutter round the corner. Its much gentler on the machine?
Might also help with your problem?

ATB
Derek
Logged
You can "chop it off" but can't "chop it on"

Offline Graham Waterworth

*
  • *
  • 2,672 2,672
  • Yorkshire Dales, England
    • View Profile
Re: Rectangular Shape
« Reply #3 on: April 06, 2009, 12:52:18 PM »
Put a G61 at the start of your g-code, that should stop the rads.

Graham
Logged
Without engineers the world stops
Pages: 1   Go Up
« previous next »