Hello Guest it is March 28, 2024, 06:30:51 AM

Author Topic: dro's reset upon each session  (Read 3561 times)

0 Members and 1 Guest are viewing this topic.

dro's reset upon each session
« on: March 30, 2009, 10:04:43 PM »
Finishing one run then packing up for the night and then the next day putting a new piece in and expecting to just match up and run another time but my coordinate haves to be re zeroed for the new piece. The new piece is exactly in the same spot and the router head was not moved. 

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: dro's reset upon each session
« Reply #1 on: March 30, 2009, 10:05:19 PM »
Persistent DRO's in general config
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: dro's reset upon each session
« Reply #2 on: March 30, 2009, 10:07:55 PM »
currently it is selected

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: dro's reset upon each session
« Reply #3 on: March 31, 2009, 03:08:20 AM »
Depending on the accuracy needed this may not be the best practice as shutting down and starting the computer and Mach may move the motors slightly. If that is not an issue then great :)
 Have you got persistant offsets checked? Have you got copy G54 from G59.253 unchecked?
Can you attach your xml and I will have a look and see if I can find a problem.
Hood
Re: dro's reset upon each session
« Reply #4 on: April 02, 2009, 08:37:19 PM »
here are the settings, the motors don't move the amount that it is off.
Re: dro's reset upon each session
« Reply #5 on: April 02, 2009, 09:17:29 PM »
z's dro though remains unouched, while x and y can be anywhere from an inch to 10 inches off.