TP,
Looks good. Why not just have the three drill cylces like the mill one has?
Can you add Dwell under safe Z.?
With real small drills ( #80 to #90) I feed the drill just a few thou at a very slow feedrate and then let it "dwell" on the surface for a time period, maybe as long as 5 or 10 seconds. Once the drill has cut into the material , similar to spot drilling it, your ready to do a drill cycle. Example, Z=.003,Q=.003,R=0,F=.02 but the drill dwells at the surface for a time period "before" the Z move. Normaly I do this using my MPG and watching the drill under a microscope and then use a peck drilling cycle.
RICH