Hello Guest it is December 09, 2019, 11:26:26 PM

Author Topic: Cutter radius comp problem  (Read 6543 times)

0 Members and 1 Guest are viewing this topic.

Re: Cutter radius comp problem
« Reply #10 on: January 04, 2006, 03:17:35 PM »
Sorry that was my poor atampt at telling you that if you put nothing Mach will put in the D Val for the T number that is loaded.

Sorry again
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com