Third party software and hardware support forums. > PoKeys

Using the PoKeys in a Pendant (Questions)

(1/1)

sharbold:
I will soon be starting to build a CNC Wood Router. Until I am able to start my build I have been working on a screenset an a pendant to use on my system. Before I get to far along with the pendant I have a few questions as to the operation using PoKeys. Please forgive me for all the dumb questions. Because of the different items I will be doing on my machine I have 7 different probe scripts that I will be using. I have purchased a Shuttle Pro but have found out that I can only use 2 custom scripts with it. So I am looking into the PoKeys. My plans are to use a series of momentary push button switches as input devices to the PoKeys to control my machine.

1) Using screen4 if I assign a Hot Key to each script button then assign the same key assignments in Pokeys when a button on my pendant is pressed my machine should carryout the script the same as if I had invoked it from my MACH screen, correct?

2) By assigning Hot Key values like (shift + right arrow) to jog X+ in my screenset and to a button on my pendant I should be able to jog my machine, correct?

3) Does anyone have the physical dimensions of the PoKeys unit?

I know this is not the most ideal way to control the machine but is there any reason the above should not work?

Thanks for your help
Sam

borisz:
1. and 2. yes.
PoKeys is presented to computer as an ordinary keyboard.
3. 45 x 63 mm

regards

Boris

Navigation

[0] Message Index