Hello Guest it is April 13, 2021, 04:35:36 PM

Author Topic: Tool offset missed  (Read 2446 times)

0 Members and 1 Guest are viewing this topic.

Tool offset missed
« on: October 31, 2009, 06:11:28 AM »
Hello all, :)

I meet a trouble with Mach 3 Version 3.
When I start operating (auto mode), the tool offset compensation isn't took into consideration. That means the green light which indicate that tool offset is "ON" immediately turns "OFF" while I key "START".
I do not meet such issue with old version...

May somebody can help me ?
Thanks very much in advance.

William.

Offline Graham Waterworth

*
  • *
  •  2,305 2,305
  • Yorkshire Dales, England
    • View Profile
Re: Tool offset missed
« Reply #1 on: November 01, 2009, 05:06:46 AM »
Do you have a G43 in your g-code file?

Graham
Without engineers the world stops
Re: Tool offset missed
« Reply #2 on: November 02, 2009, 03:03:15 AM »
Do you have a G43 in your g-code file?

Graham

Hello Graham,

Up to know, I do not have G43 in my part program...
Maybe I would have to ??
I will add and give feed back soon.

Thanks for your help; William.