i have a vertcal cnc mill and i have .015 backlash in x,and 10 or .011 in y. i have looked at the old post on backlash and tried everything.so far this is what i have done. backlash ,put amounts in and hit ok and restart. that did not work so i went to configure ,shuttle accel and matched that wiith same amounts. i have been on this for about 3 hours. i have never checked backlash in this machine since i had it ,seemed to always cut at decent tolorences it is a bridgeport series one 30 years old with a new contoller. thanks for the help in advance
alex