Hello Guest it is March 19, 2024, 05:32:48 AM

Author Topic: Bridgeport EZTRAK SX  (Read 2654 times)

0 Members and 1 Guest are viewing this topic.

Bridgeport EZTRAK SX
« on: June 30, 2010, 11:46:19 AM »
Has anyone converted a Bridgeport EZTRAK SX to Mach3? Have you also powered the machine with a VFD? I have such a machine and would like to get it going. Any advice would be appreciated.

Thanks,

          Ernie

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Bridgeport EZTRAK SX
« Reply #1 on: July 02, 2010, 06:49:28 PM »
Dont know anything about them but I would presume they use DC Servos with analogue drives.
If thats the case then you have a couple of choices, one is get new drives to replace the analogue drives.
The other option would be to use one of the external motion controllers such as DSPMC or K-Flop which can control analogue drives.
Hood