Hello Guest it is August 18, 2019, 01:38:16 AM

Author Topic: wiring up MPG  (Read 3282 times)

0 Members and 1 Guest are viewing this topic.

wiring up MPG
« on: December 24, 2005, 11:37:57 AM »
HI ALL

NEED SOME HELP WITH WIRING MY NEW MPG


PINS NEEDED   FOR +5V
PIN  FOR     OV
PIN FOR    A
PIN  FOR   B

PRINTER PORT 2 IS IN  PC
WILL ALL PINS BE ON PORT 2
Re: wiring up MPG
« Reply #1 on: December 26, 2005, 08:34:39 AM »
You are going to have to find the 0 and 5 V power... Some of the breakout boards have the 5V power on them and some do not. I have hooked into the computer power supply in the past or testing...

The pins for the A and B channels can be hooked to what you have set on the ports and pins page. There is a tab called "Encoder" where you set the pins.
Hope that helps
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com