Hello Guest it is March 28, 2024, 05:34:39 AM

Author Topic: Motors unable to run slow/missing steps  (Read 8049 times)

0 Members and 1 Guest are viewing this topic.

BClemens

*
Re: Motors unable to run slow/missing steps
« Reply #10 on: February 21, 2009, 11:05:45 AM »
Not intending to hijack a post but I seem to have developed the same problem but only on Y axis - oval circle and the next Z step down is totally misplaced.
 
I'll start another thread....

Thanks,
BC