Hello Guest it is April 10, 2021, 07:15:09 PM

Author Topic: sherline 5000 and mach 3  (Read 2467 times)

0 Members and 1 Guest are viewing this topic.

sherline 5000 and mach 3
« on: July 19, 2006, 03:47:42 PM »

I am looking at purchasing a Sherline 5000 amd using The software Mach3.

I will use this to engrave small things into wax like lettering and logos.

Is this machine capable of this and how steep is the learning curve?