Hello Guest it is March 28, 2024, 01:32:15 PM

Author Topic: Started my Taig enclosure......  (Read 27634 times)

0 Members and 1 Guest are viewing this topic.

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Started my Taig enclosure......
« Reply #10 on: January 08, 2009, 08:52:16 PM »
That's why I put it there  8)

By the way, just a note, the lower front 2 30 degree connectors had to be made as they don't make those.

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Started my Taig enclosure......
« Reply #11 on: January 08, 2009, 09:04:21 PM »
Bob
very functional, doesnt matter if its not the most beautiful in the world however I would say its not too bad :)



Quote
By the way, just a note, the lower front 2 30 degree connectors had to be made as they don't make those
Dave
 Your just trying to justify all the time you spend playing with that mill ;D

Hood

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Started my Taig enclosure......
« Reply #12 on: January 08, 2009, 09:12:40 PM »
Actually I made them on the bridgeport at work. I wanted them quickly  ;)

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)
Re: Started my Taig enclosure......
« Reply #13 on: January 09, 2009, 08:01:30 AM »
Looks good Dave....very tidy.
RC

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Started my Taig enclosure......
« Reply #14 on: January 09, 2009, 04:12:51 PM »
thanks, RC   :)

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Started my Taig enclosure......
« Reply #15 on: January 09, 2009, 05:37:56 PM »
Dave,
What are you going to do with all your extra time because you don't need to clean up?
Next you will have coolant to give it a bath.

He all kidding aside, look around the flea markets and yard sales see if you can find one of those circular
robotic vacuum cleaners. My friend bought and fixed one up and his basement floor is always clean.
It learns it's way around the shop, programs the cleaning,  and then parks itself in the charger.
hHe paid $20.00 and i am still looking for one. The dog would love it to!
RICH

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Started my Taig enclosure......
« Reply #16 on: January 09, 2009, 08:13:45 PM »
Rich, I would end up stepping on that damn thing and breaking my neck, I'm sure of it -  :D

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline N4NV

*
  •  398 398
    • View Profile
Re: Started my Taig enclosure......
« Reply #17 on: January 09, 2009, 09:35:51 PM »
Do you get a beer can holder that clips to that framing? ;D
Hood

You don't need a beer can holder, you can just make one of these and keep it in a handy plance.
http://www.youtube.com/watch?v=BNBIdVR95V0

Vince

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Started my Taig enclosure......
« Reply #18 on: January 09, 2009, 10:54:46 PM »
That'd be great if I could figure out a way to keep it from spilling my mugs..... :D

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Started my Taig enclosure......
« Reply #19 on: January 11, 2009, 11:13:06 AM »
Hi Dave,

Could have saved you a lot of work if you lived in the UK. I've just taken my mini mill out of its enclosure which is now awaiting the scrap man.

Regards, Tweakie.
PEACE