Hello Guest it is February 18, 2026, 04:44:42 AM
Profile Guest
« previous next »
Pages: « 1 2   Go Down

Author Topic: Circular pocket shout out  (Read 22743 times)

0 Members and 1 Guest are viewing this topic.

Offline Graham Waterworth

*
  • *
  • 2,784 2,784
  • Yorkshire Dales, England
Re: Circular pocket shout out
« Reply #10 on: June 15, 2006, 12:39:07 PM »
Hi,

I have had great success with 60 and 75 degree cutters, they transmit the cutting force more in the Z then in the X & Y.

The only thing to watch out for is that you have a good hold on them or they pull down in the chuck.

Graham.
Logged
Without engineers the world stops

Offline Keith

*
  • *
  • 187 187
Re: Circular pocket shout out
« Reply #11 on: June 15, 2006, 02:23:50 PM »
I just successfully 'knocked out' my 'flats by a little bit more attention to 'back-lash' if that gives anyone some hope.-K
Logged

Offline Graham Waterworth

*
  • *
  • 2,784 2,784
  • Yorkshire Dales, England
Re: Circular pocket shout out
« Reply #12 on: June 15, 2006, 05:41:29 PM »
Excellent news Keith, theres hope for all.

Graham.
Logged
Without engineers the world stops
Pages: « 1 2   Go Up
« previous next »