Hello Guest it is June 01, 2025, 03:02:26 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: SXCNC VFD settings for Mach3  (Read 7635 times)

0 Members and 1 Guest are viewing this topic.

Offline Mark Waldie

*
  • 12 12
    • Marchan Enterprises
SXCNC VFD settings for Mach3
« on: July 09, 2024, 04:08:54 AM »
Hello Folks,
Would somebody be king enough to point me in the right direction for the VFD (nowforever) settings as well as Mach3 settings to allow me to control the spindle speed via Mach3.
Regards
Mark
Logged

Offline arturod

*
  • 150 150
    • CNC4PC
Re: SXCNC VFD settings for Mach3
« Reply #1 on: July 09, 2024, 07:33:55 AM »
You need a breakout board and motion controller that can support it.  Or you can do it via modbus.
Logged

Offline Mark Waldie

*
  • 12 12
    • Marchan Enterprises
Re: SXCNC VFD settings for Mach3
« Reply #2 on: July 09, 2024, 08:05:39 AM »
Hardware all set up. Just need the P values to input into the VFD and Spindle values in Mach3, as requested.

Thanks

Mark
Logged

Offline MarshaJ847

*
  • 25 25
Re: SXCNC VFD settings for Mach3
« Reply #3 on: July 11, 2024, 04:59:31 PM »
You might check this video

CNC 6040 - Programming / Wiring the "NOWFOREVER" VFD
https://www.youtube.com/watch?v=lncconN83G4
Logged
Pages: 1   Go Up
« previous next »