Hello Guest it is May 20, 2025, 08:43:47 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: x y AXIS ORIENTATION  (Read 10807 times)

0 Members and 1 Guest are viewing this topic.

Offline Chuckar3

*
  • 5 5
x y AXIS ORIENTATION
« on: November 20, 2019, 10:55:07 PM »
ADVANTAGES AND DISADVANTAGES OF ORIENTING THE Y AXIS WITH THE LONGEST SIDE OF THE TABLE
Logged

Offline Tweakie.CNC

*
  • *
  • 9,285 9,285
  • Super Kitty
Re: x y AXIS ORIENTATION
« Reply #1 on: November 21, 2019, 01:58:37 AM »
It all depends where the operator stands in relation to the machine as most post processors compile the Gcode with the X Axis 'side to side' and the Y Axis 'front to back' (in relation to the operator).
Logged
PEACE

Offline Chuckar3

*
  • 5 5
Re: x y AXIS ORIENTATION
« Reply #2 on: November 23, 2019, 01:25:53 AM »
My table is 36" long and 17" wide.  When making signs, is most g-code written with X and the long axis or in my case the 36" length?
Logged

Offline TPS

*
  • 2,578 2,578
Re: x y AXIS ORIENTATION
« Reply #3 on: November 29, 2019, 03:30:21 PM »
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Pages: 1   Go Up
« previous next »