Hello Guest it is October 31, 2024, 07:45:00 PM

Author Topic: Mach3 screen based on PA screen  (Read 3079 times)

0 Members and 1 Guest are viewing this topic.

Mach3 screen based on PA screen
« on: March 26, 2023, 12:56:49 PM »
Good afternoon!

After enjoying the PA screen for some time, I began looking for a few customizations to fit my machine better. What was planned as a minor adjustment of some buttons and functions is becoming a full functional redesign now.

The graphics and icons were all created in PowerPoint, exported as pictures and then integrated with MachScreen.

Here are some of the biggest differences...
  • Added function bar at bottom
  • Some simplifications / cleaning up to fit my needs better
  • Use of icons to identify functions faster
  • Integration of machine alarms (spindle, air pressure, servo feedback)
  • Removed the jog functions as I am using a pendant
  • Integration of tool magazine

At the moment the main section (page1) is fully functional. Currently I am working on the 30 place tool magazin integration.

Cheers,
André
« Last Edit: March 27, 2023, 02:00:57 PM by Graham Waterworth »