:
Has any had interference activating their Pokeys device? What cured it?
I am getting interference, activating inputs to my Pokeys55 device. This is pretty serious with one event Z axis moved towards table without any input from me. Luckly we were able to hit the e stop before damage.
We have fitted many buttons connected to pokeys to do functions such as auto tool zero, open Mach3, home. etc
We suspect a new power supply used to power new Gecko 540 drive. We are not suspecting the latter as we have had events while no drives were being driven.
Actions we are considering (before reactivating this) are to add a ferrite to the PSU mains cable, and add 0.1uf capacitors to all the input switches.
Comments/suggestions and if possible experience much appreciated.
John.