Hello Guest it is July 12, 2025, 10:05:14 PM

Author Topic: G01 doesn't work properly with more than one axis  (Read 15830 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,427 7,427
Re: G01 doesn't work properly with more than one axis
« Reply #10 on: September 19, 2011, 06:02:27 AM »
sfink06,
Provide your steps per unit calculation. ie; micro steps, any gearing from motor to screw, screw pitch
Attach your xml file.

What happens if you run at 1000mm/min?
RICH