hi,
using win XP 32bit default parallel port Mach3 Mill.
here is the thing..when i press Reset button on a mach3 it turns motors on (it can run on g-code, and move about), but my mill relay output does not turns on. port is the same as motors pin is correct (when i turn it with Ative Low it turns it on..)
i went to diagnostics bar and when i push Reset it turns on the outputs of motors but Output #1 does not work..
also input switches does not work at all (autoset does not see them..).
i wonder maybe i have to install some kind off extra driver or some like that cuz' i don't think that it's the problem with port or pin settings..
Driver board from ebay..
sorry for my english.
thank you all.