Hello Guest it is February 04, 2026, 04:01:36 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Cutting a arc on the Z axis  (Read 6242 times)

0 Members and 1 Guest are viewing this topic.

Offline TheGreenMachine

*
  • 13 13
Cutting a arc on the Z axis
« on: July 01, 2010, 04:47:52 PM »
I have never cut a arc on the Z axis before, how do I accomplish this.  My start point is Z0 X2.3109, end point X2.0948 Z0.2882, Radius 0.3.  Is it as simple as G02 X2.0948 Z0.2882 R0.3?
Logged

Offline ger21

*
  • *
  • 6,295 6,295
    • The CNC Woodworker
Re: Cutting a arc on the Z axis
« Reply #1 on: July 01, 2010, 06:19:53 PM »
Do a G18 first to switch to the XZ plane, and G17 to switch back. G19 is the YZ plane.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline TheGreenMachine

*
  • 13 13
Re: Cutting a arc on the Z axis
« Reply #2 on: July 01, 2010, 07:00:03 PM »
GER21, that makes sense.  Thanks.
Logged
Pages: 1   Go Up
« previous next »