Hi,
I am moderately frustrated that the Axis Position Group, which I have long called the DRO block on the main (Gcode) page/tab
is not editable.

Today however I was fiddling around with the Tool page/tab, and on that page is the essetially similar DRO block, but in this case there is
a <ZeroAxis> button alongside each DRO. Also, the numeric content of the DRO is editable, for example; 'double-click and divide by two.
If the <DRO_AutoCalc> function is instantiated, then it's possible to do mathematical manipulation of the numeric content of the DRO.

This is exactly what I'm looking for, it behaves almost identically to the DRO block in Mach4.

Is it possible to call this particular hard coded DRO block into the main (Gcode) page?

99% of my work with my current Mach4 setup is done just on the main page, I very seldom need to view other pages/tabs, and I now
realize that it is the functionality of the DRO block that gives the most productivity gains. For this purpose, the DRO block of the Tools tab
is much preferred.

Craig