I have had this wells index mill for about 3-years , the only way I have been operating it is by jogging, programming does not work..  After having success with Mach3 on my
4x8 router I am now ready to get this mill operating on Mach3 as well.  The machine responds very well to the jog commands ,,,,Here's what I want to do,, Use existing drives
& steppers  ,I need a schematic so I can find the pulse input & dir  pulse.  (wells index CNC 700 summit dana control)  or if anyone has any other comments or suggestions
I would appreciate it .............thanx    signguy..

You can get NEW drives for only 114 a drive and you will be able to get new drives if you ever have a problem... I think the best thing you can do is take out the old drives and have something you can work with   in the end it will be the best 350.00 that you have spent on your project!

Just what I have found from trying to do stuff like that in the past

Brian