I'm curious,
If you are probing, why would you want to know what fixture offset is on. Wouldn't that be something you initiate before you start your probing cycle? Or are you going to probe mulitple fixtures at once?
The code I gave you , mc.mcAxisSetPos(inst, 2, 5.5) --(inst, Axis#, New Position) changes the position of the current fixture offset and you can change the Z Position to 0 with this code and it will update the Work Offset. You can watch it update in the
Diagnostics Tab.
To answer your most recent question; some of the developers do read through the forum, and you can start a ticket with Artsoft. If you choose to go that route, be sure to come back here and post a solution to your problem that way everyone can learn
from your post.