I purchased a copy of mach3. I have several questions now.
for example: How to use M6start.m1s, which is under directory
C:\mach3\macros\mach3mill\
I have write M6start in G-code program instead of M6. The running stopped at the line
of M6start, and showed there's error.
Can anyone provide a demonstration, or tell me how to make a macro program that
when G-code program go to M6 ( or any other M command) function as below will be done:
1.spindle motor move to reference point?coordinates +110mm
2.set output#1 to 1
3. read input#3, if it's 0,wait; if it's 1, go next
4. set output#1 to 0
output#2 to 1
5.z-axis move to reference point?coordinates +210mm
6.set output#2 to 0
7.end
then G-code program goto the next line.