Hello Guest it is November 04, 2025, 07:09:55 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Mach3 works BUT  (Read 4955 times)

0 Members and 1 Guest are viewing this topic.

Offline jbmachine

*
  • 2 2
  • Quality is not an act, it is a habit.
    • JB Machine
Mach3 works BUT
« on: November 10, 2011, 03:22:49 PM »
I have mach3 latest build running on a cnc mill upgrade - strange thing when mach3 loads for the first time some times the saved offset is correct and the tool table is correct and sometimes they are off a restart and they are fine
when things are wacky, I am missing "new" tools that were setup -

any ideas

Thanks

Logged
Jerid Brumley
JB MACHINE
www.jb-machine.com
10300 Quail Meadow
San Antonio, Texas 78230
Phone Number 210 693-7186
Fax Number 866 431-8830

andrewm

*
Re: Mach3 works BUT
« Reply #1 on: November 10, 2011, 04:20:34 PM »
You have to make sure to Save before you close Mach3, or click yes when it asks to save with a pop up when you close Mach3.
Logged

Offline jbmachine

*
  • 2 2
  • Quality is not an act, it is a habit.
    • JB Machine
Re: Mach3 works BUT
« Reply #2 on: November 10, 2011, 08:16:46 PM »
Yea but if no new tool is added and It was saved it should come back up

I think it may be pulling up a backed up xml file - can those be deleted except for the latest one??
Logged
Jerid Brumley
JB MACHINE
www.jb-machine.com
10300 Quail Meadow
San Antonio, Texas 78230
Phone Number 210 693-7186
Fax Number 866 431-8830
Pages: 1   Go Up
« previous next »