Hello Guest it is May 18, 2025, 09:56:16 PM
Profile Guest
« previous next »
Pages: « 1 2   Go Down

Author Topic: Posting gCode  (Read 16197 times)

0 Members and 1 Guest are viewing this topic.

Offline kolias

*
  • 1,163 1,163
Re: Posting gCode
« Reply #10 on: March 15, 2011, 06:56:49 PM »
Thank you both

Gerry I think I will install the "memoryoverride.reg" file and see the results

I will post back
Logged
Nicolas

Offline ger21

*
  • *
  • 6,295 6,295
    • The CNC Woodworker
Re: Posting gCode
« Reply #11 on: March 15, 2011, 07:01:45 PM »
I don't know what the memoryoverride.reg file is, but it's not the one I linked to, and probably not the fix to the problem your having.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline kolias

*
  • 1,163 1,163
Re: Posting gCode
« Reply #12 on: March 15, 2011, 07:39:24 PM »
Gerry you are a life saver.............

I first installed the “memoryoverride.reg” rebooted and did nothing

Then I installed LC alone (not from within Mach) and that did nothing

Then I installed the file from the link you provided and that did the trick. Not that it was so important but makes life much easier

Thank you both for your time

BTW the "memoryoverride.reg" is from the ArtSoft download section and I think is for people who have problems with Mack under Vista
Logged
Nicolas
Pages: « 1 2   Go Up
« previous next »