Hello Guest it is November 04, 2025, 05:48:05 AM
Profile Guest
« previous next »
Pages: « 1 2 3 4 5 6   Go Down

Author Topic: Mach3 with a DMC-2162 (Aero)  (Read 62977 times)

0 Members and 1 Guest are viewing this topic.

Offline smurph

*
  • *
  • 1,574 1,574
  • "That there... that's an RV."
Re: Mach3 with a DMC-2162 (Aero)
« Reply #50 on: February 24, 2011, 11:14:07 AM »
Backlash is not handled for external motion controllers.  Only the printer port.  Contact Galil for a firmware upgrade that will handle backlash and screw compensation.  (They may charge for it, as it is an option when purchasing a controller from them.) 

Steve
Logged

Offline Aeroshade

*
  • 141 141
Re: Mach3 with a DMC-2162 (Aero)
« Reply #51 on: February 24, 2011, 11:40:28 AM »
OK, I e-mailed my favorite Galil tech, I will see what he says. Thanks for the INFO :)



Aero
Logged

Offline Aeroshade

*
  • 141 141
Re: Mach3 with a DMC-2162 (Aero)
« Reply #52 on: February 24, 2011, 02:16:13 PM »
Well I got the e-mail back... $800 for the firmware, hope it works.


Aero
Logged

Offline battwell

*
  • 129 129
    • mercury leisure
Re: Mach3 with a DMC-2162 (Aero)
« Reply #53 on: February 24, 2011, 03:25:46 PM »
for $800 i think i might put up with a tiny backlash.
Logged
if its not broken yet, fit more gadgets!
Pages: « 1 2 3 4 5 6   Go Up
« previous next »