2hp blower motor on the 30hp spindle motor
![](http://www.thompsonmachine.net/img/mhp/l1.jpg)
![](http://www.thompsonmachine.net/img/mhp/l2.jpg)
32 inches between tailstock and spindle, looks like hydraulic tailstock has 5" travel
![](http://www.thompsonmachine.net/img/mhp/l3.jpg)
here is the data sticker on the drive for the spindle motor. I need (hope) to run this machine at 230v , unsure if drive can be rewired or If I will need a new one
![](http://www.thompsonmachine.net/img/mhp/l4.jpg)
![](http://www.thompsonmachine.net/img/mhp/l5.jpg)
here are the insides of both the elec cabinets, no drives