Search Results

361

General Mach Discussion / Re: new computer can't jog faster than 50 ipm?

« by joeaverage on November 28, 2015, 03:38:15 AM »

......  my machine to the Internet nor put it on any network, I want it to cut chips and nothing else. If you  ......

362

General Mach Discussion / Re: Mach3 shutting down

« by thespindoctor on November 06, 2007, 11:03:28 AM »

...... .  I don't have a wireless connection. The network settings are as they would be by default for a  ......

363

SmoothStepper USB / Re: LUV-N the ESS!!!

« by Jeff_Birt on May 14, 2012, 06:39:30 PM »

......  you got it figured out. Firewalls and various network problems are usually what trip up the  ......

364

General Mach Discussion / Re: "Limit Switch Triggered"

« by simpson36 on January 13, 2009, 09:44:23 AM »

......  ports were often used for file transfer and networking at one time and it is possible that security  ............  was based on my recent discovery that a wireless network adapter was making the whole CNC go nuts. False  ......

365

Mach3 and G-Rex / Re: (CHAD) the Grex Answer Man

« by Manfreds_mill on January 22, 2007, 12:22:06 PM »

......  G-Rex with the two computers that I have on the network to see if I can trip it up. So far the G-Rex nor  ......

366

General Mach Discussion / Re: Calling all post processors. ( Help me to help you )

« by creep_pea on September 21, 2006, 05:41:01 PM »

......  programs into it anyway you want, floppy, CD, Network, USB pen drive, Email, I think you get the idea. ......

367

General Mach Discussion / Re: Computer restarting with blue screen of death when running mach3.

« by Chaoticone on June 25, 2008, 09:15:43 PM »

......  this is when there was a conflict with a wireless network adapter driver and when I was tearing things up  ......

368

General Mach Discussion / Pulse fluctuates some. How do I optimize?

« by Waynec on October 15, 2008, 08:35:55 PM »

......  has almost nothing on it. No net access, no network or wireless card, no internet access, no fun at  ......

369

General Mach Discussion / Re: Help! Mach 3 (and 2) Pulse Frequency and "Dbl Plse" not stable

« by nicad on April 12, 2006, 01:22:03 PM »

......  It has no other programs on it. It has a wireless network card, but I disable that before I load mach. I  ............  changes on it at all, or even disabled its network. I loaded mach3, set it to 45000hz, and the thing  ......

370

Tangent Corner / Re: A Silly Idea ??

« by BR549 on June 02, 2012, 06:01:02 PM »

......  have the Plasma unit here running on the network and I have a routine for it to Call the Cell  ......

371

General Mach Discussion / Re: help please searching moschip site for down load , cant seam to find the right p

« by shortdog on June 11, 2012, 11:05:45 PM »

......  I get the computer delima solved, Setting up the network was where the computer crashed, driver conflict.  ............  since found out that there is a setting in the network that might actually allow me to do that to keep  ............  get every thing running good, then go back to the network,I set up, but since erased whil waiting for the  ......

372

General Mach Discussion / Re: Creating G-Code

« by DaveS on January 19, 2016, 08:37:53 PM »

......  faster and cleaner. Had no problems accessing my network, which includes a server and huge backup file  ......

373

General Mach Discussion / Re: hopefully getting this worked out

« by brmachineshop on September 23, 2011, 09:03:16 AM »

......  searching the web for hours instead of trying to network here.  ......

374

VB and the development of wizards / Re: Text Message

« by BR549 on March 14, 2011, 09:52:19 PM »

......  cdoSendUsingPort = 2 'Send the message using the network (SMTP over the network).   Const cdoAnonymous = 0  ......

375

PoKeys / Re: Adventures in Pokeys

« by ptegler on July 13, 2013, 03:21:32 PM »

......  fine the second attempt..could easily have been a network connection issue)  My encoder (on pins 3 &4 ) is  ............  but worked correctly (I think for me a it was a network timeout the first time)  ...see my last post back  ......

376

General Mach Discussion / Re: limit switch triggered

« by Hood on February 23, 2013, 05:06:01 PM »

......  lines of this http://uk.rs-online.com/web/p/rc-network-capacitors/2067831/ If you could find someone  ......

377

dspMC/IP Motion Controller / Re: New Win7 install not connecting

« by TOTALLYRC on June 26, 2011, 07:38:49 AM »

...... .  Windows & always says it is an unidentified network on my machines.  HTH,  ......

378

General Mach Discussion / Re: Printer Port Problems

« by bajadave on June 10, 2011, 08:20:00 PM »

......  the onboard Network.. no good... Did the cmos battery.. no good...  ......

379

Mach3 under Vista / Re: Windows 7 64 bit & Mach 3...

« by jimw on February 06, 2010, 09:52:44 PM »

......  to read files (g code) on another computer on the network. The real machine is able to get to the files,  ............  virtual version.  I'm guessing its a firewall or network setting that's missing. Any thoughts?  Jim. ......

380

General Mach Discussion / Re: Cannot run DriverTest.exe as unpriviledged user

« by kblancha82 on November 01, 2011, 01:58:17 PM »

......  TP. The computer is connected to a network, but the Mach 3 software was all installed to the  ......

381

General Mach Discussion / Re: Motors stalling, losing steps

« by simpson36 on February 09, 2009, 05:40:24 AM »

...... /stalling/grinding in two instances:   A wireless network adapter very definitely caused the issue.  ......

382

General Mach Discussion / Re: Code wanders off?

« by Spinnetti on April 06, 2008, 01:24:20 PM »

...... 't even have a floppy or CD drive in it, and no network connection), the result is the same on both my  ......

383

Newfangled Mill Wizard / Re: PC ID not showing

« by Ron Ginger on April 17, 2013, 07:59:01 AM »

......  is critical.  Note you do not need to have the network connected and working, it simply needs a net  ......

384

Galil / Re: Mach3 with a DMC-2162 (Aero)

« by DC on February 15, 2011, 04:29:56 PM »

......  7, 64 bit on AMD Phenom II processor Crossed network cable used between PC & Galil card Smartterm  ......

385

General Mach Discussion / Re: "run from here"

« by Hood on January 22, 2011, 03:49:46 PM »

...... .).   I took it on board. I used to run on the network or USB and never had an issue but after I saw Art  ......

386

Screen designer tips and tutorials / Re: Can anyone make a "normal" windows screen design please? 0:-)

« by ger21 on November 15, 2010, 11:34:37 PM »

......  also occasionally reboot if I copy files over the network while Mach is running. But as long as I just run  ......

387

dspMC/IP Motion Controller / Re: Welcome to the dspMC/IP board

« by Vital System Support on April 19, 2008, 01:21:53 AM »

......  Jim,  separate network card is not required.  if you will be accessing  ......

388

Mach4 Videos / Re: Mach4 - Arduino and Touchscreen

« by simpson36 on May 17, 2015, 11:06:56 AM »

......  an Ethernet switch with no other devices on the network *Thru a full operational network with and without  ......

389

Mach4 General Discussion / Re: Mach4 and Windows 10

« by TOTALLYRC on August 01, 2015, 02:50:29 PM »

...... .   If your worried about that, just disable your network card while Mach is running.   Mach4 requires that  ............  network card be enabled so that you can get a PC id. If  ............  not work. You could of course disconnect the network cable which will work. The nice thing with an  ......

390

Tangent Corner / Re: Auto Connect

« by andrewm on January 18, 2011, 03:41:43 PM »

......  the start when windows start option.  Or under network settings and connections you should be able to  ......