Topics

11

General Mach Discussion / Licence problem when upgrading

« on: July 23, 2008, 10:17:54 AM »

Hi guys,

i have a problem with my version of r2.63.
I use the same licence of an older version of mach3 and it seems it has some problem while moving in working coordinates.
The machine is doing the g0 perfectly but doing the g1 or g2 it moves wrong even if the computer says it move correctly.
Now the question is: there are different licences for different versions of mach3 or the same licence work for all the versions.

Thanks for anyone that answers.

bye

12

General Mach Discussion / question

« on: July 01, 2008, 01:41:22 PM »

Hi, when my g-code comes to choosing the tool(T101) it stops and i have to click on cycle start again to continue with the code.
Where can i put that the program doesn't stop?

Thanks

13

General Mach Discussion / Screen adjustment

« on: June 26, 2008, 12:05:21 PM »

Hi guys,

when i load a g-code the screen with the toolpath shows up normally.
the problem is that if i zoom on it, after i edit the program the screen will unzoom and go back to normal position.
Is there a way to keep the toolpath zoomed as you prefere everytime?

thanks

14

General Mach Discussion / Backlash

« on: June 25, 2008, 11:40:37 AM »

Hi guys, i have a problem with backlash.
When i put the backlash on and i move for expample 1 mm, it moves to 1mm and then it does the backlash to correct.
As you know the backlash must be done BEFORE the 1mm movement.
Where can i configurate this function?

Thanks

15

General Mach Discussion / Conversational programation of mach3 lathe

« on: April 30, 2008, 10:55:02 AM »

Is it possible to do a conversational programation with a mach3 lathe?

Thanks and best regards

16

LazyCam (Beta) / LazyCam Pro question

« on: February 06, 2008, 05:19:37 PM »

Hi guys.
With LazyCam i can import a drawing but then i don't know where i can set my tool's settings.
Can some1 explain me this?
Thanks