Messages

11

General Mach Discussion / Re: No green leds in the dro x axis

« on: July 03, 2006, 06:54:30 AM »

Hi again Brian,

A: 4.9 ish to 6.2 ish.  most of the time in the mid 5's.

I reserved the X home and "zeded the x", ref all home and bingo  green for the first time.  woohoo.

Can I check pin 2 (step)  to see if i am getting a Ve drop/gain??

Sorry to be a pain but i need to check all of it now i have a green.  Is this the correct thread to ask for help?

Regards

Paul

12

General Mach Discussion / Re: No green leds in the dro x axis

« on: July 02, 2006, 07:40:59 PM »

Thanks Brian.

I am still working "on the bench".  X axis setup only.  Nothing connected to a machine. 

The Estop (pin 10) has been toggled to work from the gui (0-1).

There are no limit switches or home switches active. I was thinking that all shoud be green. The motor is stiff with power on but no movement/rotation, i can see the dro step when i jog but nothing at the motor.

Paul

13

General Mach Discussion / No green leds in the dro x axis

« on: July 02, 2006, 07:57:11 AM »

Hi all,
 I am having trouble getting the green LEDs in the dro axis window/pane. They are red and motors will not turn

R1.84.001 on a pIII800  xp pro.

I have watch the vids read the man put pins in the doll.

Any clues/directions please.

Paul