Topics

1

General Mach Discussion / Mach4

« on: October 28, 2013, 01:14:15 PM »

hi to all, exist one data for distribution of Mach4 ?
thank
Franco

2

General Mach Discussion / ERROR B109-11

« on: April 14, 2008, 03:54:09 PM »

HI TO ALL, I HAVE DOWNOLADED R3.041 AND RUNNING THIS SETUP RETURNED AN ERROR B109-11 "cannot decompress setup program" ANY IDEAS IS WELCOME
thank in advance for your help
Franco

3

General Mach Discussion / LAZYCAM MACH 1.84

« on: October 15, 2007, 05:21:44 AM »

Hi to all, i search the LazyCam for Mach3 v. 1.84 if you have this,
please inform mi
thank in advance
Franco

4

General Mach Discussion / QUESTION

« on: September 14, 2007, 05:43:00 AM »

HI TO ALL, IN THE RELEASE R2.42 ARE PRESENT THIS GRAPHICAL UTILITY:

- DOUBLE CLICK IN THE GRAPHICAL WINDOWS PROJECT THE PICTURE IN ORTOGANL MODE.

IN THE RELEASE R2.45 THIS UTILITY ARE NOT PRESENT
THIS IS NORMAL ?

thanks in advance

Franco

PROBLEM IS SOLVED WITH RELEASE 2.46..... TANK FOR WORK

Franco

5

General Mach Discussion / DRO not 0

« on: July 22, 2007, 01:13:54 AM »

HI to all, my MACH3 rev R2.02.00 report on DRO
X-2.5500
Y-3.4420,
i have UN-CHECK "PERSISTENT DRO" this not resolve problem
i check in the "Setting alt6" and the value is reported in "ENCODER POSITION
X-2.5500
Y-3.4420"
i have click on ZERO
the value return
X-0.5500
Y-0.4420.
at next run MACH3 return the primitive value
X-2.5500
Y-3.4420,
WHAT IS THE ERROR?
I NOT USE ENCODER....
Any ideas for resolve this problem is WELCOME !!
thank in advance
Franco

6

General Mach Discussion / PROBLEM WIT LAZY CAM

« on: May 29, 2007, 03:06:15 PM »

HI TO ALL I TESTING LAZYCAM WITH JPG IMAGE, AFTER LOADING AND DEFINED THE PARAMETER THE PROGRAM STOP RUN
ONE MESSAGE REPORT "THE PROGRAM NOT RESPOND"
WHAT IS THE PROBLEM ?
THANK IN ADVANCE
Franco

7

General Mach Discussion / g4 delay

« on: March 27, 2007, 08:38:18 AM »

hi to all
my question is:
my idea for work is: entry tool to block, then wait, and then move axis, i insert this line

M3
G1 Z-2 G4 P1
G1 X25 Y0.......

this not correctly work because in the line G1 Z-2 G4 P1
execute first G4 P1 and then G1 Z-2

one solution is entry line:

M3
G1 Z-2
G4 P1
G1 X25 Y0.......

existing other solutions ?

thank for any ideas

franco

8

General Mach Discussion / Multiple joy axis togheter

« on: January 22, 2007, 02:13:51 PM »

Hi all,
I bought a new game pad which has 2 analog joysticks, so 4 axis in total. My intention is use at least 2 axis or more to control my machine, even together to do diagonals. What I want to know is what I have to do to achieve this, in terms of plugins to install and how to configure it.
Before you say it, I know the info are already here, but no matter how hard I tried, it's impossible for me to gather all the pieces togheter, so a recap would be very nice. Let's say starting from a basic mach3 install up.

Thanks in advance to all!

9

General Mach Discussion / random number on dro

« on: December 23, 2006, 01:22:27 PM »

hi to all, i have a question:
at start of mach3 the display of the quote of axis report a casual numbers
is possible running mach3 with all the display at 0.0000 ?
sky the picture at example
Franco

10

General Mach Discussion / MACH3 ....017?

« on: November 30, 2006, 02:26:35 PM »

Hi to all
i have one question, i have installed mach3 r2.0.017, in the help windows report ver r2.0.015 wait?
tank in advance
Franco