Messages

31

General Mach Discussion / Re: Turn Tooltable weird figures

« on: August 17, 2009, 02:50:33 AM »

Hood,
Done that = No Go

Chip
I see that I am not alone 
Have done new reinstall of Mach3, still the same problem
My NFS wizards work OK so I assume my License is OK
Will have a go today and copy my XML

32

General Mach Discussion / Re: Turn Tooltable weird figures

« on: August 16, 2009, 04:25:59 PM »

No one with any ideas WHY these figures pop up in my tooltable, all work impossible and lots of weird movements of the tools.

My office PC shows 0.0000 on the REF Tool 0 in all fields but my shop PC shows these odd figures, any help would be appreciated.

33

General Mach Discussion / Turn Tooltable weird figures

« on: August 16, 2009, 02:06:18 PM »

Hi,
wherefrom does the wierd figures come from to REF TOOL as all fields are like follows:
016122257031419763000000000000000000000000000000000000000000000000000000000000000

Cheers,
Bengt

34

General Mach Discussion / Re: Unitronics PLC

« on: August 09, 2009, 01:06:57 PM »

No one ?

35

General Mach Discussion / Unitronics PLC

« on: August 02, 2009, 11:32:16 AM »

Hi,
Anybody using Vision PLC's from Unitronics with Mach3/Modbus ?

Cheers Bengt

36

Modbus / Unitronics PLC

« on: August 01, 2009, 01:17:42 PM »

Hi,
Anybody using Vision PLC's from Unitronics with Mach3/Modbus ?

Cheers Bengt

37

LazyTurn / Re: LazyTurn

« on: December 29, 2008, 01:29:10 PM »

Hi Willem,

Oops, I´ve missed the update. Now LT is up and running, THANKS!

Happy endings and a Prosperous New Year Cutting Chips

38

LazyTurn / Re: LazyTurn

« on: December 29, 2008, 01:05:04 PM »

Is this Vista realted (new box and never tried LazyTurn on this one)

sgCore.dll not found

Cheers
Bengt

39

Mach3 under Vista / Re: Getting up and running in Vista

« on: November 07, 2008, 07:57:29 AM »

If I only want to use MACH3 on my office PC where I have no needs for drivers, do I need to modify registry?

Cheers
Bengt

40

VB and the development of wizards / Re: Emco tool changer macro

« on: July 19, 2008, 02:53:03 PM »

 New file for the macro, some details added. Use link in above message....