Hello Guest it is March 28, 2024, 05:49:19 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - ftissera

Pages: 1
1
LazyCam (Beta) / Offset problem
« on: April 24, 2007, 04:08:40 PM »
Hello all,
Mach3 V2.00.65 and licensed LazycamPro

Two problems:
1) The offset corresponds to the diameter of the tool whereas it should correspond to the radius. 

2) Even problem for the internal pocketting, the internal pocket is too small of a 2*radius of tool. Just for the first offset, the remainder of the pocket is correct.

I had a pocket to make with a tool of 14mm I initially had to make an offset for a tool of D:7mm before making the pocket with the tool of D:14mm!

Could somebody check this problem?
Thank you in advance
Francis

2
Newfangled Solutions Mach3 Wizards / Strange toolpath !
« on: March 15, 2007, 05:31:49 PM »
Hello Brian,
two pictures to show my problem.
Why this strange toolpath with the wizard shape DB9 ?

Tool diameter: 2.5mm

You can see the result on the part!

I forgot some things?

Mach3 V2.0.54
NewFangled V2.72

Thank you
Francis



3
VB and the development of wizards / Chinese message !
« on: January 09, 2007, 08:32:23 AM »
I have already evil with English but I must learn Chinese  :o

Francis


4
Newfangled Solutions Mach3 Wizards / New problem with 4 digits
« on: February 24, 2006, 07:09:35 PM »
Hello Brian,
Can you please reduce the display of the DRO to two or three decimals.  Or to increase the fields to display three digit in front of the decimal point?
look on my capture of screen how a cutter of 12.00mm is written  :-\

Thanks
Francis

5
General Mach Discussion / 2 Decimals DRO ?
« on: February 10, 2006, 04:33:05 PM »
Hello all,
On Mach3 V1.90.07 Can somebody tell me how to remove 2 decimals on all the DRO? 
On a machine in decimal read 0.0001mm is not realistic!  I would like to read 0.01mm I tested %+.2f format string with Screen4  but the DRO do not function any more after the modification!
Another way ?

Thanks for your help  :)
Francis

6
Forum suggestions and report forum problems. / Small suggestion
« on: January 19, 2006, 08:31:10 AM »
Hello all,
Would be it possible that the new updates of Mach are announced here at the same time on the "old forum"  :D
It would be then possible to leave it definitively! 

Thanks Benny  ;)

Francis

7
General Mach Discussion / Festivities on the portal
« on: December 19, 2005, 06:59:57 PM »
Wow,
it is the beginning of the festivities on the portal  ;D

Thank you Benny
Francis

Pages: 1