Messages

201

Show"N"Tell ( Your Machines) / Re: 1989 Bridgeport interact 412 Mach3 conversion

« on: June 16, 2013, 06:12:01 AM »

Thanks  a lot Johann!

Why are the output pins in pairs? Are they relays or what?

Dan

202

Show"N"Tell ( Your Machines) / Re: 1989 Bridgeport interact 412 Mach3 conversion

« on: June 15, 2013, 02:25:07 PM »

Thank you!

Dan

203

Show"N"Tell ( Your Machines) / Re: 1989 Bridgeport interact 412 Mach3 conversion

« on: June 15, 2013, 11:46:32 AM »

Hi Johann,

Would you share the Fanuc connector pinout?

Dan

204

Show"N"Tell ( Your Machines) / Re: 1989 Bridgeport interact 412 Mach3 conversion

« on: June 14, 2013, 08:22:37 AM »

Good work Johann. I like Delta servos. Their A2 series implement the technology used in the Mitsubishi J2S and J3 drives, for resonance suppression and continuous real time auto tuning. I am interested how you got the Fanuc VFD to work?

Dan

205

VB and the development of wizards / Re: Any new WIZARD ideas to work on ???

« on: May 28, 2013, 01:04:52 AM »

The X axis would need to be geared to the Spindle to try doing something like this at all.

Dan

206

CS-Lab / Re: Rigid tapping with IP-A

« on: May 18, 2013, 02:07:01 PM »

Good tests and videos, Hood. Thanks.

Dan

207

CS-Lab / Re: Rigid tapping with IP-A

« on: May 17, 2013, 11:42:17 AM »

Thanks, Hood.

Dan

208

CS-Lab / Re: Rigid tapping with IP-A

« on: May 17, 2013, 11:35:39 AM »

The threading in the simulation looks perfect! Engages incredibly quickly and retracts fast as well. Fingers crossed for your next session with Brian

Dan

209

Show"N"Tell ( Your Machines) / Re: Chiron FZ12 on its way sometime soon(ish)

« on: May 17, 2013, 11:20:27 AM »

Hi Hood,

That's nice! The change log says they have rewritten the MPG code. Do you feel any difference?

Dan

210

CS-Lab / Re: Rigid tapping with IP-A

« on: May 17, 2013, 11:16:28 AM »

Oh... also meant to ask - is the Z actually electronically geared to the spindle so that manually rotating the spindle would cause the Z to move? Guess you'd need to enable the M84 macro for this?

Dan