Messages

181

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: January 01, 2014, 02:33:23 PM »

Ah.... didn't know that... thanks!

Dan

182

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: January 01, 2014, 02:08:59 PM »

OK, thanks Hood. Will see if I can get an answer from them. You think Mach3 can see the IP-S as a Modbus device?

Dan

183

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: January 01, 2014, 10:47:22 AM »

Any idea how to access the analogue input on the IP-S from a brain? Need to do a rapid override and have no clue how to do it...

Dan

184

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: December 31, 2013, 02:18:34 AM »

That was two outputs I was seeing

Are you using the keyboard for jogging?

Dan

185

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: December 30, 2013, 09:51:31 AM »

Deleted the XML and created a new profile again. Now this issue is gone. Have no idea how it was getting access to the old XML after I did windows restore.

Now got to the MPG. The way it is, is strange, because it appears that they made all the settings for me and I can't change it. I have a pendant with a momentary enable switch for the resolution select and the axis select (like they show in their example in the manual), but funnily this switch also enables/disables the MPG wheel, although physically they are not linked (like can be seen in their example). Is it the normal way it works? Also pressing this switch activates the two digital outputs on the MPG module as seen on the diagnostics LEDs. Have no idea why it happens.

Dan

186

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: December 30, 2013, 07:17:13 AM »

Yes, have fresh Mach3 and XML with a new, different name profile. Will check regarding the .Net.

Dan

187

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: December 30, 2013, 06:15:20 AM »

Yes, using the IP-S. So seems I still have something left over from the IP-A installation, though when I did windows restore it deleted everything including Mach3, so not sure where do I delete this.

Dan

188

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: December 30, 2013, 04:41:48 AM »

Hi Hood,

Did a restore to Windows to a point before installing the IP-A software as I had a feeling there were some conflicts, and now those errors are gone

However, now have another issue - when trying to jog I am getting this error message. Ever seen this?

Dan

189

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: December 29, 2013, 02:27:42 PM »

Hood,

Mach version .062, plugin version 2.1 (latest on the website), but also tried the one that came on the CD with the CSMIO which was version 2.05, I think. Thanks for the offer, will get the XML tomorrow. You have the IP-S on the Connect?

Dan

190

CS-Lab / Re: CSMIO/IP wiring outputs and MPG module config

« on: December 29, 2013, 09:41:43 AM »

OK, have it partly worked out. You are right - it wants me to enter some value in the encoder index homing. After doing it, it continues to pop all sorts of other messages, like wrong slave parameters, wrong spindle parameters, and so on. Entering values for all these, it eventually allows me to do a save, but then after I exit and reload the config, all the settings are erased and back to default. Just can't wok this way. So you're saying you never had seen this... and CS Labs are not answering... Will may be try to call them tomorrow.

Dan