Messages

231

Show"N"Tell ( What you have made with your CNC machine.) / Re: Afew things I have made

« on: August 03, 2008, 06:44:22 PM »

its a clothe belt made for the tippmann 22 beltfeds and the LM7 22 upper for the AR made by lakeside machine, there are also plastic links avail  . Eric at lake side sells the 1919 22 in kit form

232

Show"N"Tell ( What you have made with your CNC machine.) / Re: Afew things I have made

« on: August 03, 2008, 02:51:57 PM »

Hi I do all the design , programing and machine work myself . Just a one man shop with a lot of automated equipment . I mostly do R+D and protoyping work for a couple of larger gun manufacturers so I have become pretty good with time management , 16 hour days 7 days a week helps also. I do all the anodizing in house, I will soon be farming the anodizing out on large runs as I just dont have time if it gets over 30-40 pieces.

The 1919 22 and the gatling 22 are both drawings/desgns that belong to other people so those I cannot share, would love to but just wouldnt be fair .
Here is a link to a few of my other gun related projects , i have a lot more I will be updating the site with and as soon as I find some time will be creating a download section with alot of my 2d and 3d drawings .  http://www.thompsonmachine.net/gun.htm

Justin over at cncgunsmithing has a lot of wonderful 3d solid models for various guns that are free to download also .

The power drawbar is all air , uses the original valve off the back of a $10  3/8 impact wrench used to turn the drwbar . there are a couple of air cylinders that drive the unit down on the drawbar . I would be happy to share the drawings for this one but I sell the unit in Kit form for a reasonable price. If you studdy the pics its not hard to duplicate.


I have started a larger gatling in 357 magnum but just havent found time to finish , I have a full set of plans free to download for a 1903 gatling in 30/40 craig over on the yahoo "Gatling Gun " goup . A number of fellows over there are also building the little 1873 like mine in the pics.

233

Show"N"Tell ( What you have made with your CNC machine.) / Re: Afew things I have made

« on: August 02, 2008, 11:55:10 PM »

Here are some pic of a power drawbar I designed and built for my bridgeport clone , four years of daily use and not a single problem

234

Show"N"Tell ( What you have made with your CNC machine.) / Re: Afew things I have made

« on: August 02, 2008, 11:46:12 PM »

I started building a scale sterlink mk4 smg in 22 lr , but havent had time to finish , I spent about 4 days on the project, jumping back and forth between solidworks creating the 3d models and the mill making parts. Here are the results .



the rec on the bottom is the scale tube , the one on the top is a fullsize sterling  receiver







scale barrel










These last pics show the magazine housing, bolt , grip frame, trigger housing, trigger and sear

235

Show"N"Tell ( What you have made with your CNC machine.) / Re: Afew things I have made

« on: August 02, 2008, 11:31:47 PM »

these series of pics are a british 2" mortar , These came into the US with a large hole in the bbl . I registered this one s a DD with ATF allowing it to be made live again . The pics show the process of turning , threading and cutting locking notches in a new bbl

236

Show"N"Tell ( What you have made with your CNC machine.) / Re: Afew things I have made

« on: August 02, 2008, 11:24:38 PM »

here is a working scale 1919 browining belt fed in 22 lr






below is a pic of a pair of 1919 and a 1917 water cooled

237

Show"N"Tell ( What you have made with your CNC machine.) / Re: Afew things I have made

« on: August 02, 2008, 11:18:07 PM »

sieg x3 conversion




9x20 conversion

238

Show"N"Tell ( What you have made with your CNC machine.) / Re: Afew things I have made

« on: August 02, 2008, 11:15:48 PM »

here is a 2/3 scale 22 short gatling gun , this is a scale working model of an 1873

239

Show"N"Tell ( What you have made with your CNC machine.) / Re: Afew things I have made

« on: August 02, 2008, 11:14:26 PM »

This is a singleshot AR15 receiver I make for the single shot 50 cal market

 a few of the rec in process









here is a semi auto 275 round 22 lr pistol i built a few years ago

240

Show"N"Tell ( What you have made with your CNC machine.) / Afew things I have made

« on: August 02, 2008, 11:11:40 PM »

Just found this section and thought I would show some of the stuff I have made

Before anyone freaks out with all the firearm related stuff I want to point out that everything here is legal in the United States were I reside and I am a licensced 07 firearms manufacturer and an SOT  (machine gun license)



semi auto m60 receiver