Messages

91

General Mach Discussion / Re: JY5300 AND JY800W AND MACH3

« on: May 09, 2013, 02:16:59 PM »

ugotit33 please answer Russ( Overloaded) question so others can be helped following this thread.

YIPPIEEEEEEEEE ! !  !   
Would you be so kind as to tell us what the problem was and what you did to fix it ? ? ? ..... Please ? 

Thanks,
Russ
 

Dave

92

General Mach Discussion / MOVED: New toy - DM3000 lathe

« on: May 08, 2013, 04:58:46 AM »

This topic has been moved to Show"N"Tell ( Your Machines).

http://www.machsupport.com/forum/index.php?topic=24511.0

93

General Mach Discussion / MOVED: MCPI software needed

« on: May 08, 2013, 04:56:19 AM »

This topic has been moved to Third party software and hardware support forums..

http://www.machsupport.com/forum/index.php?topic=24520.0

94

G-Code, CAD, and CAM discussions / Re: BobCad/Cam setting incorrect measurement units in Gcode

« on: May 06, 2013, 05:08:23 AM »

I have no experience with this software, but this fella seems to:

http://www.machsupport.com/forum/index.php/topic,21342.0.html

Dave

95

FAQs / MOVED: Toolpath not cutting

« on: May 01, 2013, 03:26:50 PM »

This topic has been moved to General Mach Discussion.

http://www.machsupport.com/forum/index.php?topic=24470.0

96

General Mach Discussion / MOVED: Looking for a plug

« on: May 01, 2013, 03:23:34 PM »

This topic has been moved to Tangent Corner.

http://www.machsupport.com/forum/index.php?topic=24469.0

97

General Mach Discussion / Re: Im new to the Mach3 program

« on: April 29, 2013, 03:50:11 PM »

Hi, Jaime,

Are you absolutely sure you have the correct ports and pins set up for the motors, and the green checkmarks are showing that they are all enabled?

Dave

98

General Mach Discussion / Re: mpg mode

« on: April 29, 2013, 03:26:23 PM »

I'm sorry, unfortunately I have no idea why, maybe someone else here will have some input for you.

Dave

99

General Mach Discussion / Re: Shuttle pro assign buttons for single step + and -

« on: April 29, 2013, 01:38:37 PM »

Ok, the  Jog Incr++ and  Jog Incr-- sets the actual step size of the cycle jog step on the MPG (TAB on the keyboard).

Upon thinking about it, I do not think there is a step jog choice for buttons as that is what the center jog wheel is for. Set your step increment in the flyout (TAB), and then the center wheel will jog to whatevcer you set that to. I have mine set to .001", and if I need to ove it faster/further, I just use the outer ring to do that function.

Hope that helps?
Dave

100

General Mach Discussion / Re: Shuttle pro assign buttons for single step + and -

« on: April 29, 2013, 01:24:55 PM »

Single step has to do with going through a GCode file a step at a time, not jogging.

Unfortunately your other choices I would have thought to work, but I guess it's possible your shuttle may not be working properly, or the plugin may not be working for you.

When I get a moment, I will try this for you and get back with any info.

Dave