Messages

61

Show"N"Tell ( What you have made with your CNC machine.) / Re: Grill Temp Gauge Chart

« on: June 28, 2013, 11:37:30 AM »

That'll require too much math and note-taking so that's not going to happen.

You'd have to figure in too many variables, such as:

- How bad/good my work week was
- How many people are stopping by
- How many people I tell to go home 
- How good the food turns out..............you get the idea   

Dave

62

Show"N"Tell ( What you have made with your CNC machine.) / Re: Grill Temp Gauge Chart

« on: June 28, 2013, 09:51:36 AM »

Yep, we've actually been trying to come up with something "witty" to do on the opposite side as it looks unbalanced now 

Thanks, Rich, and anytime, my friend- 
Dave

63

Show"N"Tell ( What you have made with your CNC machine.) / Re: Grill Temp Gauge Chart

« on: June 28, 2013, 05:04:11 AM »

 

Thanks Craig, and Tweaks!
Dave

64

General Mach Discussion / MOVED: the makita rt0700cx4

« on: June 27, 2013, 06:50:38 PM »

This topic has been moved to Third party software and hardware support forums..

http://www.machsupport.com/forum/index.php?topic=24919.0

65

Third party software and hardware support forums. / Re: postprocessor w/o arcs

« on: June 27, 2013, 06:49:40 PM »

Why not ask Vectric for the Post Processor? They should be the ones helping you with this.

Dave

66

Show"N"Tell ( What you have made with your CNC machine.) / Re: Grill Temp Gauge Chart

« on: June 26, 2013, 04:40:31 PM »

It was, but I don't know who made it as I mentioned above.

I mostly use "Rowmark" as they carry a LOT of different types of engraving material.

Dave

67

Show"N"Tell ( What you have made with your CNC machine.) / Re: Grill Temp Gauge Chart

« on: June 26, 2013, 04:18:36 PM »

Thanks Derek, I'll jot that one down.

Oh, and I fixed it up for the 145 Degree fans 

Dave

68

Show"N"Tell ( What you have made with your CNC machine.) / Re: Grill Temp Gauge Chart

« on: June 26, 2013, 12:59:09 PM »

Thanks Brett!

And Terry....... again, I'm anal, and I disagree with that .... just a thought- 

Dave

69

Show"N"Tell ( What you have made with your CNC machine.) / Grill Temp Gauge Chart

« on: June 26, 2013, 09:06:28 AM »

Hi, all, thought I'd share a simple job I did, as sometimes these are the most fun.

They're quick and easy and can actually be useful,  :lol:

Unfortunately I'm no grill master, (as those of you charcoal grillers are forming a collective "duh!"), so I'm always kind of anal about my foods being cooked properly. I thought this would come in handy.....

I used an engraving material (not sure what brand as this came in a aftermarket buy) with a black base and brushed metal cap and held on with automotive emblem 2 sided tape. Hopefully it holds up, but if not, I'll use a better material down the road 

Dave

70

General Mach Discussion / Re: Looking For Help

« on: June 20, 2013, 06:36:43 PM »

I believe all the info you'll need is right here.

http://www.machsupport.com/purchase.php

Good luck with your endeavors-
Dave