Hello Guest it is January 21, 2022, 06:28:40 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - aliorix

Pages: 1
Hi everyone  :D

Im still trying to finish my build but after some good progress (motor working good, all ports and pins configured) i get stuck trying that this Breakout board recognise when i press the end stops, home or emergency stops... 
Everyting is wired like they said, i move the motor and when i press the endstops the motor continue like nothings happen  >:(

This is the board:

It came with a cd with some plugin that is that i already put, and a manual that sais the numbers of ports and pins

I don't have anything more than that. So i suspect that im not geting something.

This is the wiring diagram

Any idea from where to start checking?

Machscreen Screen Designer / Re: [Help] One axis screen
« on: January 19, 2021, 09:15:51 AM »
Its doing exactly the same...

i will try to record a video and upload here

Machscreen Screen Designer / Re: [Help] One axis screen
« on: January 19, 2021, 09:02:16 AM »
If I copy&paste your g-code (that have 4 entrys) it only shows me 3 in the list, then i check again to press GO and anything is happening, actual length is showing -2.55 and your keypad only shows 1 time :/

Maybe something wrong with my profile?
im opening mach3, load the profile, and then i go to view --> load screen

Machscreen Screen Designer / Re: [Help] One axis screen
« on: January 19, 2021, 08:56:26 AM »
No, if I put some length in manual (or if I choose from the list) the actual doesn't change at all.

Maybe is a problem of my computer? i will try to test it in my house today and see if there is something different :/
Here i have win10  :(

Machscreen Screen Designer / Re: [Help] One axis screen
« on: January 19, 2021, 08:06:05 AM »
Wow man, thank you for your time! really!

I tested.

Your keyboard still pop up 1 time, if i put any number and press ok, its working, but if i try to do it again it doesn't pop up

I see that in the GO button you put a condition (if) with a oemled, but i don't see any led's
So when i load the list, and press go i don't see anything happening. And if i scroll down in the list and chose anything, when i press go it come back to the first entry of the list.

Ah, and i see that you replace the actual length (oem 86) with a x oem

Machscreen Screen Designer / Re: [Help] One axis screen
« on: January 19, 2021, 06:12:35 AM »
Thx again TPS!

So i make it work all the manual input thing (now i understand why you  put in the script the "&GetOEMDro(1400)")
I give up using your keypad because i couldn't make it work more than 1 time, so a friend told me that i can use the auto-calculator, it's a little small, but anyway)

Now i'm ashamed to say that i didn't understand a word about the list...
The g code is showing the txt, the load and edit buttons are working but the "GO!" its look like is not working, and i don't know if to add another dro to be able to see the cords of the list or if there is a way to show that in the target dro (that now is with the oem 1400)

I don't have a problem even to make two tabs, one for manual and another for list.

Machscreen Screen Designer / Re: [Help] One axis screen
« on: January 14, 2021, 09:18:43 AM »
Thx again!

Ok, so i fixed the actual pos.

And i dont understand how to put a free dro :/

i changed the manual input and is working but only 1 time, i can put 1 time some number, press OK and then when i want to open again is not working :/

Machscreen Screen Designer / [Help] One axis screen
« on: January 14, 2021, 06:57:37 AM »
Hi everyone, i'm trying to build something like this -->https://www.youtube.com/watch?v=dHXoMG2s5yE, but not so fancy xD

So, besides the doubts that i have with the hardware part of the project, i have a couple of problems with the software part of the project.

Basically I'm making my own screen since I didn't find anything that looks like what I need.

My first problem is that I don't know anything about programming, so for sure there are a lot of things that are basic but i am not aware, so sorry for that.
I will share a picture of what i have done, and some of my doubts

First of all i want to thanks to TPS for this fantastic keyboard https://www.machsupport.com/forum/index.php?topic=36213.msg247828#msg247828

Ok, better to start.
*The load and edit buttons are working perfectly

*The stop and home. I want to think that too [function stop (3); function Zero all (7)] i hope that I will be able to try it soon.

*The Go! button, i use the function set this line next to execute (156) but i don't see it in the target length [x dro (800)]

*I can't figure out how to choose between picking a length from the list or making a manual input. I saw the video and its look like he uses a led with some script, but as i said im realy lost there.

*On the Actual length [a machine cord dro (86)] its shows 0.00
But in the target length [x dro (800)] its shows -2.55 all the time and from the beginning, when i press in input target and the keyboard opens it shows too the -2.55, if i change the number and press ok, it doesn't change in the target length

I will realy apreciate a lot any kinde of help  :)
i will attach the .set file if someone want to look at it

Pages: 1