Messages

51

General Mach Discussion / Re: units per min vs units per rev

« on: March 21, 2009, 12:47:45 PM »

Hello Chip

Even if i use the mpg to jog only the units per min works , the unit per revolution does not show anything.

Hope this helps

Marcel

52

General Mach Discussion / Re: units per min vs units per rev

« on: March 21, 2009, 09:47:47 AM »

Thank you for your replies

All my machinist life as been working in thousands per tooth, on manual machines,you can feel the cutter . I have to wrap my mind on cnc milling of letting the machine go on it's own,and using very small carbide end mills .125 or less ,it is quite a challenge .

And working with titanium and manganese bronze does not help .

Well i always like a challenge and this is it.

Marcel Beaudry 

53

General Mach Discussion / units per min vs units per rev

« on: March 20, 2009, 09:41:04 PM »

Iis there a way for the wizzards to be changed from units per min to units per rev

I work with very small carbide end mills and even with a feed of .01 unit per min the end breaks i need to cut at 6000 revolutions .0002 per tooth.

Thank you for your time

Marcel Beaudry

54

Show"N"Tell ( Your Machines) / Re: novakon milling

« on: March 17, 2009, 06:32:22 PM »

I was quite surprised when i tried it the first time this is more than a hobby machine .i have seen hobby mills made by converting a drill press . but this is built as a milling, a fast spindle , i hope in the future that they could put a faster spindle 10000 rpm, and use smaller end mill .


Marcel

55

Show"N"Tell ( What you have made with your CNC machine.) / Re: Pattern for Castings - parts is parts...

« on: March 17, 2009, 03:47:57 PM »

That is realy nice machining  .

Marcel

56

Show"N"Tell ( Your Machines) / Re: novakon milling

« on: March 16, 2009, 06:24:17 PM »

Not sure about the electonics gizmo as long as it gives me the precision i need .

In electonics i do not know anything . Have to rely on other people for that.

Marcel Beaudry

57

Show"N"Tell ( Your Machines) / Re: novakon milling

« on: March 16, 2009, 03:54:07 PM »

the x axis  11 inches
      y axis  7  inches
      z axis  11.8 inches

Avery nice machine ,the spindle speed is what i like 6000 rpm .

Marcel

58

Show"N"Tell ( Your Machines) / novakon milling

« on: March 16, 2009, 03:04:05 PM »

Just installed my new milling

59

General Mach Discussion / Re: What is your trade?

« on: March 02, 2009, 11:57:26 AM »

I am now retired
Was tool and die maker, general machinist,production machinist,trouble shooter,welder.

Now i have all my time for myself, the wife,and my machines ,Waiting for a cnc milling.

Marcel Beaudry

60

General Mach Discussion / Re: Where do you live ?

« on: February 26, 2009, 12:42:50 AM »

Quebec ,  Quebec ,  Canada