1
Mach4 General Discussion / M6 and auto tool measure script?
« on: May 15, 2020, 08:26:12 AM »
Hi all!
I'm struggeling with my tool measurement. I've developed my own probe and tested that everything works.
I've also made a fully functional M6 tool change macro. Btw, my mill is a Emco VMC-100, with 10 tools.
And now I would like to make a tool measure macro that I can call in the MDI and it will run through all my tools before I start.
I've called it M10. But there seems to be a problem. My first tool, tool 1, is always shorter, or the other tools are longer.
I'm struggeling with my tool measurement. I've developed my own probe and tested that everything works.
I've also made a fully functional M6 tool change macro. Btw, my mill is a Emco VMC-100, with 10 tools.
And now I would like to make a tool measure macro that I can call in the MDI and it will run through all my tools before I start.
I've called it M10. But there seems to be a problem. My first tool, tool 1, is always shorter, or the other tools are longer.