Yes 'zero probe' will be included in the screen as well as a few enhanments...ETA: Soon
1. Add Status bar to Keyboard.
2. Add Button to keyboard to convert number to MM/Inch
3. Prompt to confirm Zeroing an axis.
4. Fix rewind and run from here buttons.
5. Sub menu /MDI button: When you hit the up arrow to it should let me click on the last thing entered.
6. On the program run screen, when you are running a file it allows me to hit the load gcode button.
7. Allow me to write to the user labels on the main screen. (They may already be userlables, I just need to know what the dro numbers and user label numbers are.
8. Files/: Remove the Rewind button
9. Offsets/Fixture Offsets: Rename the first column from “Offset” to "Current Part Position" or something like that.
10. On the trace outlining function the button "Stop Trace needs to stop mach instead of feedholding it. Also the trace speed should be called a feedrate. When it finishes tracing I would like it to say that it is finished or just close out the trace box.
11. When you hit “Estimate Run Time” while it is estimating the button says "Stop Simulating" It should say "Estimating Run Time" Or something like that.
12. Nudge buttons should all be the same layout as the jog buttons. And the text inside the button should be the same as the jog buttons.
13. On most of the screens where it shows the tool data, it should show the tool description. And on the DRO screen it should show the tool length. And if you are going to show the tool change position on the DRO screen it should have XY and Z. Also relabel "Change Position to "Tool Change Position".
14. Somewhere add a Label that lets us know what profile you are running
15. Make the main DRO's change from Green to Red if they are in Machine zero
16. Diagnostics/Motors/Spindle: Takeout the Pulley Display. I just want the button to setup the pulleys
17. Diagnostics/Inputs: not all the led's work in here.
18. Diagnostics/Ports and pins: you have the right number with led, but I would like them in order. 10, 11, 12, 13, 15 for port 1 and Port 2.
19. Diagnostics/Outputs: Digitize needs to be moved to the inputs page. (Digitize is a input not a output)
20. Diagnostics: Rename General Config to "Screen Config" Or something like that!
21. Add a step by step tool setup, with or without a gage block/touch sensor Height
22. Add text to explain function or help file.
23. zero probing
Guest
Show Posts
